Will be received and opened on Tuesday, October 17, 2023, at 9:00 a.m. in the Material Services Department of North Oaks Medical Center located at 15790 Paul Vega MD Drive, Hammond, LA 70403. Bids will be publicly opened and read at the time and date mentioned above.

North Oaks Health System requires that all bids be submitted electronically through Central Auction House at www.centralauctionhouse.com. For questions related to submitting bids electronically please call (225) 810-4814.

For information relating to the bid proposal requirements, contact Minyon Gremillion, North Oaks Director of Anesthesia at (985) 230-6610.
 The specifications listed below are used only to denote the quality standard of product desired and do not restrict bidders to a specific brand, make, manufacturer, or specification named; these specifications are used only to set forth and convey to prospective bidders the general style, type, character, and quality of product desired; and that equivalent products will be acceptable.

SPECIFICATIONS FOR BID ARE AS FOLLOWS:

• Height 22.6”, Width 35.2”, Depth 26.5”, Weight 262 lbs
• 1 Central Control Monitor with the ability for 12 different personalized screens and operate the entire pump.
• Alarms to be displayed on the Central Control Monitor and the roller pumps. Color coded alert and alarm messages displayed on the Central Control Monitor
• The Central Control Monitor needs to be able to operate the roller pumps and centrifugal pumps flow and alarms. The roller pumps and centrifugal pumps require their own knobs to operate the pumps also.
• Central Control Monitor needs to have a PC card to record actions of the pump and keep a log.
• Centrifugal pump needs to have the ability for pulsatile flow.
• The emergency battery needs to have the ability to run at full capacity for 60 minutes.
• Roller pumps must not have tubing inserts. Must have the ability to change the size of the tubing without inserts. Must be able to change occlusion settings without stopping the pump.
• Must be able to add roller heads and modules to the system in the future without changing the base. Example 6” or 4”roller heads, pressure modules, level alarm modules, temperature modules or CDI 500 modules.

 

Standard Components:

1 ea Base 100-120V

1 ea 2' Pole  1 ea Battery backup

1 ea Crossbar Fitting 1 ea Central Control Monitor with PC card capability

Gas Blenders:

1 ea Pole Mounted Blender

1 ea U.S. Hose Kit

Roller Pumps:

1 ea Large Roller Pump, 6" diameter (15 cm)

3 ea Small Roller Pump, 4" diameter (10 cm)

1ea Roller Pole Mount Bracket

Centrifugal Pump:

1 ea Centrifugal Control Unit

1 ea Drive Motor

1 ea Manual Drive

1 ea Centrifugal Motor Holder

Flow Meter:

1 ea Flow Meter Module

1 ea Flow Sensor

1 ea Flow Module Mounting Bracket (holds 2)

Air Detection System:

1 ea Air Detector Module

1 ea 3/8" sensor; 3/8" ID x 3/32" wall

Level System:

1 ea Level Detector Module

1 ea Yellow Alert Transducer

1 ea Red Alarm Transducer

Pressure:

2 ea Pressure Module (2 sensors)

Temperature:

2 ea Temperature Module (2 probes)

Lamps:

1 ea Lamp 33" (84 cm)

Accessories:

1 ea Stainless Steel Shelf

1 ea CDI 500 Module to communicate with the Central Control Monitor

 
ADDITIONAL SPECIFICATIONS:

1. Bid must include any and all shipping and handling costs.
2. Bid must include full manufactures warranty.
3. Bid must NOT include any tax. North Oaks Health System is tax-exempt; thus, any applicable taxes will be the responsibility of the bidder.