Front End Loader
Mississippi > Yellow Creek State Inland Port Authority
RFP: 97542776
Listing Information/Advertisement:


Used Wheel Loader
40,000 lbs / 4.3 CY Class Machine
Age: • Machine must be year model 2019 or
later
• Machine hour meter must be less than
350 hours
Warranty • Minimum 3 year Full Machine Warranty
through January 2023
Weight Class: • Must be between 40,000 – 45,000 lbs.
Operating Weight
Engine: • Minimum 220 net power
• Minimum 6 cylinder Tier 4Final diesel
Powertrain: • Machine shall have a
forward/neutral/reverse switch standard
on the implement joy stick
• Powershift transmission with 4 fwd/3 rev
speed ranges
• Machine shall have ground accessable
ports to sample engine and transmission
fluids
• Machine shall have the ability to
electronically set the maximum spped to
comply with site specific maximum speed
limits
• Machine shall have the ability to
electronically adjust the shift ag
Axles: • Axle configuration shall be hydraulically
locking fron t differential with a
conventional rear differential
• Axle shall have fully enclosed brakes and
final drives
Brakes: • Service brake shall feature completely
closed and sealed stadard outboard oilimmersed
disc brakes on frint and rear
axles that are adjustment free
• Audible alarm and indicator light shall
alert operatior if brake pressure drops
below normal operating parameters
• Machine shall have continually charged
nitrogen accumulators to provide
stopping capability after loss of engine
power
• Parking brake shall be disk and caliper
type on driveline for positive operation
which is spring applied and hydraulically
released.
Operator's
Station
• Cab shall be air conditioned and heated
• Seat mounted joystick control shall
operate both lift and tilt functions.
Joystick shall integrate forward/reverse
direction switch and adjustable 3rd
function hydraulic control
• Front and rear wipers
• At least two 12v outlets
• Minimum 7” color touchscreen to control,
monitor, and manipulate diagnostics,
machine control, and system parameters
for machine, engine and powertrain
• Minimum of one factory installed rear
camera system visible through the
operator's display
Wheels/Tires • Standard radial tire size shall be 23.5R 25
with 2-piece rim
Hydraulic
System
• Standard 3rd function hydraulics available
for use with tools that require hydraulic
power
• Total hydraulic cycle time shall not exceed
10.3 seconds
• Load sensing attachment hydraulics
• Scale system
• Ride control programmable for different
speed settings
• Hydraulically driven reversable engine fan

Servicablility • All service points shall be accessable from
the ground on the same side of the
machine.

SUBMITTAL INFORMATION
Creator Username: YCPARD
Bidding Privacy: Bid encryption
Started: 26-Jun-2020 9:00:00 AM CDT
Ends: 26-Jun-2020 9:30:00 AM CDT ( Expired )
History: 391 Views, 0 Messages
Event Status: Expired since 26-Jun-2020 9:30:00 AM CDT
Actions: Sign-In to Bid
Username:

Password:
Visitors: Visitors/Central Bidding Plan Holders
DOWNLOAD BID DOCUMENTS
PUBLIC MESSAGE BOARD
Discuss questions with the owner/creator of this Listing.
UPDATE/ADDENDUM HISTORY
All updates/changes are listed below::
25-Jun-2020 10:52:53 AM CDT
N/A